Видео

Best of 3 on this subject by far

Спасибо вы помогли разобраться .

Fantastic fix for our microwave! Thank you for being so thorough and helping us to fix something minor ourselves, while giving us all of the information to keep us safe and a pathway to not having to replace the microwave.

New beginner question. Can you use Mach 3 with software like Easel, Carveco, Fusion 360.

Great video. Clear instructions and very clear warnings.

great video!

Good and simple. Thank you. Is there a video on the microwave capacitor? I think mine is on the way out with noise?

Thank you! life saver

Just a hint you keep saying drive it's called a lens inside and you can use a drop or two or alcohol it has to be 99 percent to help get stubbornness of cleaning I always try this method of cleaning them sometimes the discs your using needs a through cleaning or buffing that's why it don't run right just a hint make sure that you let it dry inside too

Thank you Steve . My CNC doesn't recognize the cable/USB from the Desktop. Any solution?

People complain about the 0008 battery error. For this a very simple worked for me. I short circuited the +- and it started charging normally again. Thank me later.

What size fuse does it use ?

Thank you for the excellent video

Is there a way to rig an optical mouse to ignore Y axis input and only use the X? I have a condition where my hands shake, sometimes pretty badly making it impossible to see what's going on on the screen unless I take my hand off the mouse entirely! I've been using an Auto Keys Macro to toggle my Y Axis on and Off as needed, but the game I'm playing now doesn't allow that and completely disables my Auto Keys. Even if it ruins the mouse, I'll buy a cheap one to modify and use that one when I'm having problems and I need to eliminate, or at least minimize, the Y axis input.

Its 7 years later and headphones still have this crappy flaw. Not just these in particular. My father got me some jbl tune 760nc last Christmas. At the time, they were 135€, so around $146. I've never dropped them, ever!! I'm taking my 2nd degree in the field of sound and image. I take good care of my equipment. The headphones just broke on the side while I was wearing them. They're the best headphones I've ever owned, but the ear piece is too heavy to only be connected by something so fragile.

Thank you very much for a straight forward video of the basic first level failure of a microwave.

my one is rellly loud

Up 3am trying to find the problem with my 400 dollar Panasonic inverter we only had for 3 months then my Wife yelled from the inner lines of the creepy floor boards of our turn of the century pillars of a foundation, did you fix the microwave yet while I'm tuned in to the only guy that made since all night the Guru brew shouts out to you my guy now I can finally go to bed its now 7 am. ITS FIXED

Cant get Z auto zero to turn Digitize on and off when wires are touched together. Pin 15 is not used by any other function. DESCRIPTION OF ACTIONS: PROBE, wire one to pin 15 input, wire two to GROUND. Ports and pins. PROBE Port 2 (BOB on top of ESS smooth stepper board) pin 15, active low checked. SAVED AND EXIT RESTART. CHECK DIGITIZE LIGHT always lit if the two wires are touched together or not. Unable to have DIGITIZE light on and off when two wires are touched together. What am I doing wrong? Thanks

Thank you

great video , explained really well great to see you started with safety...great job looking forward to the next .....how to vid, kindest regards...Nick

Great video! I love the testing adapter.

Hi, I've used cnc machines before, but not Mach 3. Having just purchased a machine running Mach 3 I found your video to be a great introduction. I have now subscribed to your channel. 🇬🇧

What software do you use to create the G Code?

I like that shirt where did you get it?

Leave the covers off and run saw at idle and see where oil is coming from. Mine comes out where the bar gets oiled while idling. It should only oil at high rpms. There should be a way to adjust how much oil is applied.

You can change the power saver settings on the laptops. Ive been running an old laptop with a built in parallel port it works fine with Mach3. I have to replace the setup though because I want to run the latest LinuxCNC and can get any version past 2012 to load on the i686. Going to switch to a PC with pciE parallel port

.

Thanks Steve, what is the proper way to set your Z 0 point? How do you send y The tool to its zero point?

This was awesome. Not only helpful, but I felt like Ron Swanson was teaching me. Great job.

Thank you

[delivered entirely in one singular tone] "Anyway, let's get this installed. Or, no... This one. We don't want... We don't want that one." *flicks old, broken microswitch out of frame and grabs replacement* Oh man. This guy is my hero.

Nothing helped needed to connect Ethernet cable

Thank you! 😊

thanks for the clear and understandable video, for a person like me who is just starting in this matter it is of great help👍

For mine, on pressing that button, nothing happens

thank you for this video.. i see you no longer make videos on this channel. but your video helped me diagnose my issues with mine since i cant find the manual for it, and its nice seeing the insides of it before i take mine apart! cheers!

❤❤❤ thank you I was thinking about making this for my daughters birthday

Thank you so much for making sense of this to me I very much appreciate it. You made it simple enough for me to understand!

Thanks for the video! Very appreciated

Great video keep up the good work

This is great video. I built a plasma table a few years ago and use a mechanical limit switch to set and zero the Z axis. I want to change to a pnp proximity sensor but am limited by the voltage and amperage on the C10 breakout board. I found a prox rated at 5 vdc but needs 200mA to operate. I think the max on the board is 25 mA. Do you have any suggestions on a switch I could use and/or how to wire a prox rated at higher volts and amps into the C10 board I have? The mechanical limit switch has a spring loaded arm and it does "wander" at times. Anyway, thanks if you do have any info.

easy to understand, short and to the point

Thanks Steve I have the same problem and thanks to you I knew the reason

I thought it was for teeth whitening

Finally someone who read the directions about the small screws, but you didn’t mention if you look on the side of one of the drill guides it tells you what hole to use for different thickness wood. And keep in mind the length of the screw you use depends on the thickness of wood you are screwing into. Very informative video… I’ve been using the drill master a while now love it.

Thank you so much for this tutorial. I was able to restore my old Dell Laptop before giving away. I didn't have to wait for my son to do it either.

What if it's bring little light on the keyboard, and when you blog charger it indicates light at the charging spot

I just tried this on the same laptop it's not coming on

Very helpful